USER’S MANUAL
ALWAYS KEEP THE AREA SURROUNDING AND
THE LIFT CLEAN BY REMOVING ALL OIL SPILLS.
To avoid the risk of slipping, make use of the
recommended personal protection (anti-slip footwear).
3.6.7 RISK OF ELECTRIC SHOCK
Risk of electric shock in areas of the lift housing electric
wiring. Do not use jets of water, steam (high pressure wash
units), and solvents or paint in the immediate vicinity of
the lift, and take special care to keep such substances clear
off the electrical command panel. (Fig. 25)
Fig. 25
3.6.8 RISK OF COMPONENT FAILURE DURING
OPERATION
The manufacturer has used appropriate materials and
construction techniques in relation to the specified use of
the machine in order to manufacture a reliable and safe lift.
Note, however, that the lift must be used in conformity
with the manufacturers prescriptions and the frequency of
inspections and maintenance work recommended in
Chapter 6 “MAINTENANCE” must be observed.
3.6.9 RISK RELATED TO IMPROPER USE
Persons are not permitted to stand or sit on the platforms
during the lift maneuver or when the vehicle is already
lifted. (Fig. 26) All uses of the lift other than the uses for
which it was designed are liable to give rise to serious
accidents involving the persons working in the immediate
vicinity of the unit. It is therefore essential to adhere
scrupulously to all regulations regarding use, maintenance
and safety contained in this manual.
Fig. 26
3.7 SAFETY INSTRUCTINS FOR SERVICING
Maintenance or repair work by authorized service
personnel only.
Turn off and padlock the main switch before doing
any maintenance, or repair work.
Work on pulse generators or proximity switches by
authorized service personnel only.
Work on the electrical equipment by certified
electricians only.
◆ Do not replace or override the safety devices.
◆ Ensure that ecologically harmful substances are
disposed of only in accordance with the appropriate
regulations.
-10-
To Next Page
Loading...