Embedded Controller BOXER- 6614
Security
Setup submenu: Security
Change User/Supervisor Password
You can install a Supervisor password, and if you install a supervisor password, you
can then install a user password. A user password does not provide access to
many of the features in the Setup utility.
If you highlight these items and press Enter, a dialog box appears which lets you
enter a password. You can enter no more than six letters or numbers. Press
Enter after you have typed in the password. A second dialog box asks you to
retype the password for confirmation. Press Enter after you have retyped it
correctly. The password is required at boot time, or when the user enters the Setup
utility.
Chapter 3 Award BIOS Setup 3-29
To Next Page
Loading...
