17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. Do not leave this device in an uncontrolled environment with temperatures
beyond the device’s permitted storage temperatures (see chapter 1) to prevent
damage.
19. Do NOT disassemble the motherboard so as not to damage the system or void
your warranty.
20. If the thermal pad had been damaged, please contact AAEON's salesperson to
purchase a new one. Do NOT use those of other brands.
21. The Hex Cylinder Coppers on the front panel are not removable.
22. Repeatedly assemble and disassemble the system may cause damages to the
exterior paint and surface and screw holes.
23. Use the right size screwdriver.
24. Use the screwdriver correctly to remove screws from the system.
To Next Page
Loading...
