Aalborg DPC - Page 102

98
COMMAND
NAME
DESCRIPTION No.
COMMAND SYNTAX
Command Argument 1 Argument 2 Argument 3 Argument 4 Response
lb/hr U: lb/hr
lb/day U: lb/day
oz/sec U: oz/sec
oz/min U: oz/min
NuL/min U: NuL/min
Nml/sec U: NmL/sec
Nml/min U: NmL/min
Nml/hr U: NmL/hr
NL/sec U: NL/sec
NL/min U: NL/min
NL/hr U: NL/hr
NL/day U: NL/day
Nm3/min U: Nm3/min
Nm3/hr U: Nm3/hr
Nm3/day U: Nm3/day
Nf3/sec U:Nf3/sec
Nf3/min U:Nf3/min
Nf3/hr U:Nf3/hr
Nf3/day U:Nf3/day
USER
(user defi ned)
No Argument
Set previously defi ned
USER unit
U:USER
USER
(user defi ned)
Change parameters of
the user defi ned unit
<k-factor value>
[>0.0]
<Time Base>
0- Second
1- Minute
2- Hour
3- Day
<Use Density>
[0 or 1]
0 – No
1 – Yes
U:user, K-Factor,
TimeBase,UseDensity
Example:
U:USER,1.5,1,0
No Argument (status)
Returns currently
selected units.
U:<EU name>
Example: U:SmL/min