A&D AD-4405A - Commands to Control the Indicator

AD-4405A Weighing Indicator Page 61
16.3.2. Commands to Control the Indicator
Zero the Display
Sets the current display to the zero point.
Template MZ
Command
Reply
Tare
Sets the current display to zero of the net data.
Template MT
Command
Reply
Clear the Tare Data
Clears the tare data and displays the gross data.
Template CT
Command
Reply
Display the Gross Data
Displays the gross data.
Template MG
Command
Reply
Display the Net Data
Displays the net data.
Template MN
Command
Reply
Accumulation (M+)
Accumulates the displayed data.
Template MA
Command
Reply
Clearing the Accumulated data
Clears the accumulated data.
Template CA
Command
Reply
16.3. Command Format
A
C
A
C
A M
A M
N
M
N
M
G
M
G
M
Z
M
Z
M
T
M
T
M
T C
T C