A&D AD-4405A - Page 68

Page 66 AD-4405A Weighing Indicator
$DL Inserting a DeLay time (0.1 second step)
Example: DL10 : 1.0 second delay
Strings
Output or print specified strings enclosed by a single quotation (’).
’ itself is described using three single quotations; ’’’.
Example: ’A & D’ ’This is a sample of ’’’ .’
Set data bits = 8 bits if using the 8-bit characters.
Hexadecimal
Control code of the printer etc. preceded by #.
2 characters proceeded by # is hexadecimal code.
Example: #09, #7C
The #FF code can not be used because it is used for internal control.
Example
SF1,$ID$DN$CR$LF$GR$UT$CR$LF
Serial output data format 1, ID number, data number, carriage return and line
feed, Gross weight, unit, carriage return and line feed.
SF2,’ Welcome to A & D’$LF’Total weight ’$AN$TL$LF$LF
Serial output data format 2, the strings ’ Welcome to A & D’ and line feed,
the strings ’Total weight ’ accumulation count, total weight, and 2 sets of line
feed.
PF2,$DT$TM$LF$AN$SP$TL$LF
16.4. UFC Command
Date and time
Line feed
Accumulation count
Total weight
Line feed