A&D EK-4100i - 8-5. Function List

20
8-5. Function list
Class Item
Param-
eter
Description

0
Auto power-off disabled
poff
Auto power-off
1
Auto power-off enabled
Automatically
power off
0
Manual range change

1
Automatic range change
2
Fixed to the lowest range
3
Fixed to the middle range
rng
Range
4
Fixed to the highest range
Range change
setting for EW-i
series
0
Fast / sensitive
1

2
3
Cond
Response
4
Slow / stable
Software filtering
0
Stable when within ± 0.5d/0.5s

1
Stable when within ± 1d/0.5s
st-b
Stability band
width
2
Stable when within ± 2d/0.5s
Conditions to
turn on the
stability mark
0
Disabled
trc
Zero tracking

1
Enabled
Tracking zero
shift

0
Point (.)
pnt
Decimal point
1
Comma (,)
Decimal separator

0
Comparator disabled
1
Compares all data
2
Compares all stable data
3
Compares plus data > +4d
4
Compare stable plus data > +4d
5
Compares data > +4d or < -4d
Cp
Comparator mode
6
Compares stable data > +4d or < -4d
Conditions to
compare.
d = the minimum
display division

0
Buzzer does not sound.
1
Buzzer sounds at LO.
2
Buzzer sounds at OK.
3
Buzzer sounds at OK and LO.
4
Buzzer sounds at HI.
5
Buzzer sounds at HI and LO.
6
Buzzer sounds at HI and OK.
bep
Buzzer output
7
Buzzer sounds at HI, OK and LO.
Buzzer sounds
according to
the comparator
results
0
Command and stream modes

1
Command and PRINT key
2
Command, PRINT key and auto-print A
3
Command, PRINT key and auto-print B
prt
Data output
mode
4
Command mode only
Auto-print A:
+ data
Auto-print B:
+/- data

0
No pause (general equipment)
pUse
Data output pause
1
1.6 seconds (for AD-8121)
Interval between
continuous data

0
No output
1
AD-8121 format
info
GLP output
2
General format
GLP
output format

0
2400 bps
1
4800 bps
2
9600 bps
func
bps
Baud rate
3
1200 bps
 Factory setting