A&D EK-4100i - 11-2. OP-07 Underhook Assembly

29
End block
3. Press and hold the PRINT key. Release the
PRINT key when recend is displayed. The
balance outputs the “End block”.
4. end appears. Press the MODE key to
return to the weighing mode.
AD-8121 format “info 1” General format “info 2”
: Space, ASCII 20h
CR: Carriage return, ASCII 0Dh
LF: Line feed, ASCII 0Dh
A & D
MODEL EK-1200i
S/N Q1234567
ID ABCDEF
DATE 2011/11/17
START
TIME 01:23:45
ST,+000123.4 g
ST,+000234.5 g
ST,+000345.6 g
ST.+000456.7 g
END
TIME 01:25:43
SIGNATURE
- - - - - - - -
~~~~~~~~~~~A~&~D<CRLF>
MODEL~~~EK-1200i<CRLF>
S/N~~~~~Q1234567<CRLF>
ID~~~~~~~~ABCDEF<CRLF>
DATE<CRLF>
<CRLF>
START<CRLF>
TIME<CRLF>
<CRLF>
<CRLF>
ST,+000123.4~~g<CRLF>
ST,+000234.5~~g<CRLF>
ST,+000345.6~~g<CRLF>
ST,+000456.7~~g<CRLF>
END<CRLF>
TIME<CRLF>
<CRLF>
SIGNATURE<CRLF>
<CRLF>
<CRLF>
---------------~<CRLF>
<CRLF>
<CRLF>
recend
Returns to
the weighing mode
end
To output
“End block”
Press and hold
Manufacturer
Model
ID number
Date
Start time
Column for
signature
Weight data
Ending time
End
block
Title
block