Need help?Do you have a question about the AAON RSMVQ and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Manufacturer | AAON |
| Model | RSMVQ |
| Input Voltage | 24 VAC |
| Communication Protocol | BACnet MS/TP |
| Operating Temperature Range | -40°F to 158°F (-40°C to 70°C) |
| Enclosure Rating | NEMA 1 |
| Humidity Range | 5% to 95% RH, non-condensing |
General introduction to the RSMVQ module, its features, applications, and system requirements.
Details the capabilities, configurations, and limitations of the RSMVQ module for VFD compressors.
Presents the physical dimensions of the RSMVQ module with a diagram.
Specifies electrical and environmental requirements for proper installation and operation of the RSMVQ module.
Details the wiring connections for the analog and binary inputs of the RSMVQ module.
Explains how the RSMVQ monitors head pressure and controls condenser fans.
Illustrates the wiring connections for the relay and analog outputs of the RSMVQ module.
Provides a comprehensive map of all inputs and outputs available on the RSMVQ module.
Describes the function and operation of each input and output on the RSMVQ module.
Details the operational sequences for cooling and dehumidification modes.
Explains the compressor envelope protection features and their impact on operation.
Describes EXV operation and how head pressure is controlled by the RSMVQ module.
Explains the LCD screen layout and the functions of the navigation and editing keys.
Provides a navigational map for accessing various main screens on the RSMVQ LCD display.
Details the various screens available within the RSMVQ module's interface for configuration and status.
Shows how to view system status information for compressors, fans, and EXVs on the LCD screen.
Illustrates how to access and interpret readings from various sensors on the RSMVQ module.
Explains the different alarm conditions the RSMVQ module can detect and display.
Describes how to view a history of past alarm events on the RSMVQ module.
Shows how to view and check current setpoint values for various system parameters.
Details the screens for monitoring and interacting with Copeland™™ VFDs.
Details the screens for monitoring and interacting with Danfoss VFDs.
Details screens for Copeland™™ VFD fault codes, limits, and current speed.
Covers VFD status/software and DMQ EXV communication and suction pressure readings.
Explains the function of each LED on the RSMVQ module for troubleshooting and verification.
Provides instructions and tables for testing temperature sensors and their resistance/voltage readings.
Details how to test the head pressure transducer using a provided voltage/pressure chart.
Configuration steps for systems with a single condenser connected to the RSMVQ module.
Configuration steps for systems with two condensers connected to the RSMVQ module.
Guides on selecting the correct compressor type and model number for system configuration.
Details on selecting unit tonnage and provides a specification table for compressor types and speeds.
To Next Page
