Need help?Do you have a question about the AAON RSMD2R and is the answer not in the manual?
General| Brand | AAON |
|---|---|
| Model | RSMD2R |
| Category | Control Unit |
| Language | English |
Overview of RSMD2R module features, applications, and capabilities for digital compressors.
Provides physical dimensions and specifications for the RSMD2R module.
Details electrical power, VA load, and environmental operating conditions for the RSMD2R.
Illustrates and describes the wiring connections for RSMD2R analog and binary inputs.
Details the wiring for RSMD2R analog outputs and relay outputs.
Provides a table listing and categorizing all RSMD2R module inputs and outputs.
Explains the function and use of each RSMD2R input and output.
Describes the operational sequences for cooling, dehumidification, and head pressure control.
Introduces the LCD display and navigation buttons for the RSMD2R module.
Maps the navigation flow through RSMD2R main and module-specific screens.
Details the screens displaying system status, including compressor and fan operation.
Explains screens showing current readings from various system sensors.
Describes screens that display current setpoint values for system parameters.
Lists and explains various alarms generated by the RSMD2R module.
Covers screens for viewing past alarms and accessing protected configuration screens.
Details screens for configuring settings and diagnosing system issues.
Explains additional diagnostic screens for inputs, outputs, and force modes.
Shows how to view alarm counts and configure the module's board address.
Explains how to use RSMD2R LEDs for verifying operation and troubleshooting.
Guides on testing the suction pressure transducer for R410-A refrigerant.
Details testing procedures for Copeland discharge thermistor temperature sensors.
Provides instructions for testing Type III 10 K Ohm thermistor sensors.
Describes how to test the head pressure transducer using a chart.
Details wiring and configuration for the default two-condenser operation.
Explains wiring and configuration for a single condenser per module setup.
Details wiring and configuration for a single condenser across two RSMD2R modules.
Describes wiring and configuration for a single condenser with three RSMD2R modules.
Illustrates wiring for two condensers using two RSMD2R modules (A1/B1 and A2/B2).
Details configuration for condenser fans to cycle ON/OFF with compressors.
To Next Page
