Need help?Do you have a question about the AAON RSMVQ2R and is the answer not in the manual?
General| Brand | AAON |
|---|---|
| Model | RSMVQ2R |
| Category | Control Unit |
| Language | English |
Provides a general overview of the RSMVQ2R module, its features, and intended applications in HVAC systems.
Details the specific features and intended applications of the RSMVQ2R module for VFD compressors.
Illustrates the physical dimensions of the RSMVQ2R module with key measurements.
Details electrical wiring requirements, environmental considerations, and power-up procedures for the RSMVQ2R controller.
Diagram and explanation for wiring the various input terminals of the RSMVQ2R module.
Explains how the RSMVQ2R controls condenser fans based on head pressure.
Diagram and explanation for wiring the various output terminals of the RSMVQ2R module.
A detailed map listing all inputs and outputs of the RSMVQ2R module.
Detailed explanations for each input and output terminal on the RSMVQ2R module.
Describes the operational sequences and staging logic for cooling and dehumidification modes.
Explains how the RSMVQ2R protects the compressor by operating within its envelope limits.
Details Electronic Expansion Valve (EXV) operation and head pressure control strategy.
Details the RSMVQ2R's LCD display layout and the functions of its navigation and editing keys.
Provides maps for navigating through the RSMVQ2R's main screens and module-specific screens.
Explains how to view system status, compressor, fan, and mode information on the RSMVQ2R.
Details how to view sensor readings and status for various sensors on the RSMVQ2R display.
Details how to view active alarms and descriptions of various alarm conditions, plus alarm history.
Details how to view current setpoint values for various system parameters on the RSMVQ2R.
Screens for monitoring and controlling Copeland VFDs, including connection and basic parameters.
Screens for monitoring and controlling Danfoss VFDs, including connection and basic parameters.
Details advanced screens for Copeland VFDs, covering speed limits, fault codes, and current limits.
Details screens for DMQ EXV communication and VFD software versions.
Explains the function of various LEDs on the RSMVQ2R for diagnostics and status indication.
Provides instructions and data for testing coil temperature sensors using resistance and voltage.
Details how to test the head pressure transducer using voltage and pressure charts.
Details the configuration steps for a single condenser per module setup using Prism 2.
Details the configuration steps for a two condensers per module setup using Prism 2.
Guides the selection of compressor types and models within the Prism 2 configuration software.
Details unit tonnage selection and provides a table of compressor types, tonnage, and speed specifications.
To Next Page
