AAON RSMVQ - APPENDIX A: SYSTEM CONFIGURATION; Single Condenser Per Module

31RSMVQ Technical Guide
APPENDIX A: SYSTEM CONFIGURATION
Single Condenser Per Module
Single Condenser Per Module
In Single Condenser Per Module wiring conguration, the
Condenser Signal is wired to AO1 and the RLY3 is enabled.
Refer to the gures below for Prism 2 cong uration and Modular
Service Tool Screen selection.
RSMVQ Condenser Options Conguration Screen
Select the “1 Cond per RSMV” option on the above handheld
Modular Service Tool screen.
RSM#1 CONFIGURATION
Condenser Options
1 Cond per RSMV
USE < or > TO CHANGE
Figure 10: Prism 2 - Single Condenser Module Conguration