Model 55i IP Phone User Guide 121
Handling Calls
Handling Calls
When you are connected to a call, you can use the softkeys or hard keys on the phone
to place a call on hold, transfer a call, or conference.
Placing a Call on Hold
You can place an active call on hold by pressing the Hold key. When you
place a call on hold, only your phone can retrieve the call.
To place a call on hold
1. Connect to the call (if not already connected).
2. Press the Hold key.
The line/call appearance light begins to flash slowly and after a short time the phone
beeps softly to remind you that you still have a call on hold. The screen displays
"Call Held" with the line number the call is held at the phone.
IP Phone UI
Note: If you are connected to another call, the phone does not beep to remind
you that you still have a call on hold.
L1
John Smith
Tue May 17 10:19am
L1 Hold
201
Keri March
To Next Page
Loading...
