160 Model 55i IP Phone User Guide
Additional Features
Status Scroll Delay
Using the Aastra Web UI, you can specify a scroll delay option that allows you to set
the time delay, in seconds, between the scrolling of each status message on the phone.
You can specify this setting in the "Status Scroll Delay (seconds)" field at the path
Basic Settings->Preferences->General. The default time is 5 seconds for each
message to display before scrolling to the next message. You can increase or decrease
this time as required. Setting and saving the value in the Aastra Web UI applies to the
phone immediately.
Configuring Status Scroll Delay
Use the following procedures to specify a status scroll delay on the IP phone.
1. Click on Basic Settings->Preferences->General.
2. Enter a value in the "Status Scroll Delay (seconds)" field. Valid values are: 1 to
25 seconds. Default is 5 seconds.
3. Click to save your settings.
Aastra Web UI
To Next Page
Loading...
