Aastra 6757i CT - Shared Network Connection

Model 6757i CT IP Phone Installation Guide 13
Installation and Setup – 6757i CT Base Unit
Shared Network Connection
To connect a network device (such as a computer) to the phone, connect an
Ethernet cable into the network port on the top of the phone marked PC.
Plug the other end of the Ethernet cable into the network port on the
network device with which you are sharing the network connection.
Note: The PC jack on the 6757i CT does not supply inline power onto other network
devices. All Ethernet cables used must be category 5/5e straight-through
cables, such as the cable provided with your phone
Ethernet
Cables
Other Network Devices
Network Jack
(if Inline power provided,
do not install the power adapter)
Power
Adapter
To Network
To Other
Network Device
Power Adapter
Connection