Aastra 6757i CT - Desk or Wall Installation

Model 6757i CT IP Phone Installation Guide 17
Installation and Setup – 6757i CT Base Unit
Desk or Wall Installation
Install on the Desk
The desk installation for the 6757i CT IP phone consists of two legs that
attach to the back of the phone near the top corners. A total of four
different viewing angles allows users to personalize their phone viewing
preference.
1. Attach each leg by inserting the tabs on the leg into the slots on the bot-
tom of the phone. There are three pair of leg slots on each corner of the
phone; each leg uses two pairs (1&2, or 2&3) giving two leg positions
designating different viewing angles. Furthermore, the legs can be
reversed which offer two additional viewing angles.
2. For a higher viewing angle, use the second and third slots from the top.
3. For a lower viewing angle, use the first and second slots from the top.
4. Push the stand towards the phone until it snaps into place.
Three stand slot locations
for customizing the height
of the desk phone.
Total 4 Viewing Angles
20.7 deg.
Incline Angle
23.3 deg.
Incline Angle
26.6 deg.
Incline Angle
30.9 deg.
Incline Angle