Operations during a Call
MD Evolution – Dialog 4422 IP Office38
Changing from Loudspeaker Mode to
Handset Only
When you participate in an incoming or outgoing conversation using
the loudspeaker mode, you can, at any time, decide to continue
the call in handset mode, providing you with more privacy. To do
so:
 Once again, press the Loudspeaker key on your extension.
The LED associated with this key turns off, and your extension’s
loudspeaker is deactivated. Only the handset remains active.
Muting during a Conversation
When you participate in an incoming or outgoing conversation, you
may activate your handset’s mute function, preventing your party
from hearing what you say. To do so:
É Press the Mute key to activate the mute function.
The LED associated with this key is lit, and your handset’s
microphone is momentarily deactivated. Only the voice reception
remains active on your extension.
To deactivate the mute function:
É Simply press the Mute key once again.
The LED associated with this key is turned off, and your conversation
once again continues normally.
Note: This function is also applicable when you carry on a
conversation in handset only or loudspeaker mode.
To Next Page
Loading...
