55MD Evolution – Dialog 4422 IP Office
Call Forwarding Services
Cancelling a Variable Call Forward
A temporary variable call forward is shown on your extension by a
flashing Call-fwd key.
To cancel this call forward:
Call-Fwd ÖÔ Simply press the Call-fwd key on your extension.
The variable call forward is immediately cancelled, and confirmed
with the service acceptance tone and a corresponding message on
your extension’s screen.
í Next, press the C (or Clear) key on your extension.
Your extension returns to idle status.
Call-Fwd Ô When there is no call forward activated, your extension’s Call-fwd
key LED will turn off.
Note: Alternatively, you may also dial the prefix “60”, which
is the usual prefix for cancelling a variable call forward. The
result will be the same.
Activating a Call Forward Pre-Defined on
the Call-fwd Key
You may also pre-define and assign a variable call forward to the
Call-fwd key on your extension. See the “Programming Your
Extension’s Services” section.
This enables you to quickly activate or deactivate a variable call
forward that you use frequently, for example to your secretary.
To activate this pre-defined call forward:
Call-Fwd Ô Simply press the Call-fwd key on your extension, which
initially is turned off.
The pre-programmed call forward is immediately activated, and
confirmed to you with the service acceptance tone, and a corre-
sponding message on your extension’s screen.
CANCEL ACCEPTED CAL
ALL CALL FORWARD A
WESSON Paul 407
To Next Page
Loading...
