Voice Mail Services
MD Evolution – Dialog 4422 IP Office68
* z Dial “*” in order for your call to be transferred to voice mail.
“*” is the code used by default to consult voice mail through the
automated attendant. It may have been replaced by “#”.
You are then connected to the voice mail system and are
prompted to dial the mailbox number you wish to access.
STATION NO z Dial your extension number, which is also your mailbox
number.
As with internal consultation, a system message prompts you to
enter your user password.
PASSWORD z Enter your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “Programming Your Extension’s Services”
section.
You are now connected to your mailbox’s consultation menu (see
details to follow).
Notes:
Interaction with the voice mail system or automated attendant
is carried out through the exchange of DTMF codes. For an
internal call, the transition to DTMF end-to-end dialling is
automatic. It is also the default from an external analogue
DTMF extension. From a GSM mobile phone, transition to
DTMF end-to-end dialling may necessitate a specific
operation, depending on the GSM mobile phone involved.
The above method is also applicable for consulting your
voice mail from a third party set within your facility. Simply
begin by dialling the internal number – typically 885 – for the
automated attendant.
An alternative solution for accessing your mailbox from out-
side your facility is dialling your DID number. If your extension
is successfully connected to the voice mail system, the rest
of the procedure is identical to that described.
To Next Page
Loading...
