167MD Evolution – Dialog 4425 IP Vision
Programming Your Extension’s Services
3timesÞ Press three times the dynamic function key shown on the left
in order to highlight the number “4”, which corresponds to
the programming of your extension’s Call-Fwd key.
Select Press the dynamic function key shown on the left.
The following screen is displayed when you access the programming
of your extension’s Call-Fwd key.
N timesÞ or Û Repeatedly press one of the dynamic function keys shown on
the left in order to highlight the number “n”, which corre-
sponds to the desired call forwarding service:
1Immediate To activate an immediate call forward.
2 On no reply To activate a call forward on no-answer condition.
3On busy To activate a call forward on busy condition.
4 On no reply or on busy To activate a call forward on both no-answer and busy conditions.
5 Do not disturb To activate a do not disturb call forward
Select Press the dynamic function key shown on the left.
In the first four cases, your extension displays the type of call
forward requested, and prompts you to enter the number or name
of the internal or external call forward recipient.
In the last case, an acceptance confirmation of the do not disturb
call forward is provided by your extension. All you need to do is
then exit your extension’s service programming mode (see details
to follow).
CALL FORWARD KEY
Immediate
2 On no reply
3On busy
4 On no reply or on busy
5 Do not disturb
Options ÛÞ Select
CALL FORWARD KEY - IMMEDIATE
Input a number: <507>
Input a name: < >
OK
Options ÛÞ Select
To Next Page
Loading...
Need help?
General