the camera, but provides half frame inching for gate inspection and
loop situating when installing a fresh mag.
From a Remote Cable
The Lemo2 connector, as well as Lemo6, Lemo8 and Amph9 acces-
sory connectors, provide the capability of using a remote on/off with
either a half-frame or full-frame inching function.
2.8.4 Single Frame Operation
With the use of electronic inching switch via the wooden handgrip
or a remote cable, the AATON 35-III can be used as a simple inter-
valometer for single frame operation. Each frame is 1/4 sec exposu-
re.
2.9 LCD CONTROL PANEL AND JOG
The AATON 35-III utilizes a straightforward and intuitive control
panel structure in conjunction with a small jog wheel to access and
adjust all operator functions.
2.9.1 The Aaton Jog
Located to the immediate right of the LCD control panel, Aaton
Jog is a small wheel designed to simplify many user functions. When
used in conjunction with the contol panel the jog allows for quick
adjustment of some of the otherwise time-consuming parameters
(such as the setting of a precise 5-digit speed or a film short end).
2.9.2 Understanding the Control Panel
The control panel consists of a LCD display and four buttons to
access information. The control panel operates in two modes: Show
and SET. To show a parameter without adjusting, go directly to one
of the black function buttons to view relative information. To set a
parameter, first press the white SET button, then go to the appro-
piate function. Information is changed by either toggling that but-
34
To Next Page
Loading...