AAton 35-III - Setting the ASA

check that all diodes are operational and evenly illuminated. As part
of the normal gate cleaning procedure, clean this area with a Q-tip
moisten with lens cleaning fluid to assure that no dust particles
cover the LED array.
The seven diodes will illuminate in test position whether or not
timecode is running in the camera.
8.7.2 Setting the ASA
When changing magazines, make sure the ASA/ISO setting of the
camera matches the film stock being used.
83
AATON CODE
USER 35 US 23/1 -2 1/20/98 19:46 Page 83