EasyManua.ls Logo

AAton 35-III - Warm Weather

AAton 35-III
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
located in its base which is designed to automatically turn on when
needed and maintain the claw mechanism at a temperature of 15°F.
One of the cold, hard facts of cold weather shooting is the conside-
rable reduction of battery life. Do whatever possible to conserve
your batteries and always carry more than usual. Favor many small
batteries, such as on-board and lithium cells (which are easier to
keep warm), over large block batteries. Use a powercable so that the
on-board battery could be kept in a pocket close to the warmth of
your body.
When filming outdoors, use a standard or heated barney to protect
the camera body from direct contact with the wind and cold. To
avoid condensation inside the mechanism, electronics and lens ele-
ments, do not take the equipment indoors or expose it to sudden
temperature changes. If and when the equipment must be moved
inside, do so by first placing it in a sealed container and let it thaw
for a few hours before opening.
Always keep your raw stock and loaded magazines above freezing
temperatures at all times during a cold weather shoot.
4.7.2 Warm Weather
The keep the temperature of the camera body down, avoid having
the camera exposed to direct sunlight for long periods of time by
using a barney, all-weather cover, or some form of shading, like an
umbrella.
Most importantly, keep raw stock and magazine in a dry cooler, or
in the coolest location available.
59
THE AATON SYSTEM
USER 35 US 23/1 -2 1/20/98 19:46 Page 59

Table of Contents