ABB 4600 Series - OPERATION; Instrument Start-up; Operating Page; Operating Page Error Messages

10
…4 ELECTRICAL CONNECTIONS
230
Remove cover (see Fig. 4.1)
Slacken captive screws
and remove
protection cover
Remove front
panel screws
Remove front
panel
Remove cap
and screw
230
230V
115V
1
2
3
4
3
Select the mains
voltage required
5
4.5.2 Panel-mounted Instruments – Fig. 4.7
4.5 Selecting the Mains Voltage
4.5.1 Wall-/Pipe-mounted Instruments – Fig. 4.6
Slide instrument
out of case
Undo captive
screw
Remove plug
(if fitted)
1
2
3
Select
the mains
voltage
required
1
1
5
115
115V
230V
115
4
Information. Use a small,
flat-bladed screwdriver to remove
the screw cap from the case.
Fig. 4.6 Selecting the Mains Voltage – Wall-/Pipe-mounted Instruments
Fig. 4.7 Selecting the Mains Voltage – Panel-mounted Instruments