Section 3 Unpacking, inspecting and storing
3.1
Removing transport packaging
IEDs require careful handling.
1. Examine the delivered products to ensure that they have not been damaged during
the transport.
2. Remove the transport packing carefully without force.
The cardboard packaging material is 100% recyclable.
3.2 Inspecting the product
3.2.1
Identifying the product
1. Locate the IED's order number from the label on top of the plug-in unit.
2. Compare the IED's order number with the ordering information to verify that the
received product is correct.
3.2.2 Checking delivery items
Check that all items are included in the delivery in accordance with the delivery
documents.
3.2.3 Inspecting the IED
IEDs require careful handling before installation on site.
• Check the IED to see if any damage occurred during transportation.
1MAC051065-MB C Section 3
Unpacking, inspecting and storing
615 series ANSI 11
Installation Manual
To Next Page
Loading...
