ABB 615 Series - Section 4 DNP 3.0 parameters; 4.1 Parameter descriptions

A
B
C
D
E
F
G
A070584 V2 EN
Figure 6: Flush mounted case and plug-in unit
A 6.46 inches (164 mm)
B 6.97 inches (177 mm)
C 7.08 inches (179.8 mm)
D 6.30 inches (160 mm)
E 7.64 inches (194 mm)
F 6.02 inches (153 mm)
G 1.61 inches (41 mm)
4.3.2 Semi-flush mounting the IED
A mounting kit is needed for semi-flush mounting the IED. In addition to the detailed
mounting instructions, the mounting kit includes:
•
Raising frame
• Gasket
• Screws
1MAC051065-MB C Section 4
Mounting
615 series ANSI 19
Installation Manual