ABB 615 Series - Rack Mounting the IED to a 19 Equipment Frame

A
A070594 V2 EN
Figure 16: Wall mounted IED in rotated position
A 17.72 inches (450 mm)
Minimum of 1.97 inches (50 mm) space is needed above and below the
frame for rotating.
4.3.6 Rack mounting the IED to a 19” equipment frame
A mounting kit is needed for rack mounting the IED in a 19" equipment frame. In
addition to the detailed mounting instructions, the mounting kit includes:
•
Mounting panel
1MAC051065-MB C Section 4
Mounting
615 series ANSI 29
Installation Manual