5.7 Energizing the IED
Before you connect the auxiliary power, check that the terminal strip is wired and
placed correctly.
During the start-up all LEDs are lit for a short period.
• Green Normal LED starts to flash
• LCD lights up and IED start-up is displayed
• The main menu is displayed. A steady green Normal LED indicates a successful
start-up.
If the IED detects a diagnostic error during start up, the green Normal LED flashes and
the internal fault code is displayed on the LCD.
1MAC051065-MB C Section 5
Connecting
615 series ANSI 39
Installation Manual
To Next Page
Loading...
