ABB 615 Series - Exchanging the IED

6.5 Exchanging the IED
To exchange the IED with another identical unit, remove the IED and install the new
one. The exchangeable units can be found from the PartsOnLine system, see
www.abb.com/partsonline. Use of PartsOnLine requires user registration.
To exchange an IED to a different unit, change the case and connect the wires.
Check with your local ABB if the IED can be upgraded.
1MAC051065-MB C Section 6
Removing, repairing and exchanging
615 series ANSI 43
Installation Manual