ABB 615 Series - Page 25

A
B
1
1
A070581 V2 EN
Figure 4: Flush mounting a case into a panel cut-out
A 6.52 inches (165.5 ±1 mm) 1 M5 fixing screws
B 6.36 inches (161.5 ±1 mm)
3. Tighten the M5 screws.
The allowed range for the fixing screws’ tightening torque is 0.52...0.74 foot-
pounds (0.7...1 Nm).
1MAC051065-MB C Section 4
Mounting
615 series ANSI 17
Installation Manual