ABB 615 Series - Section 6 Tolerances; 6.1 DNP 3.0 timing considerations

A
B
A070580 V2 EN
Figure 12: 19” rack mounting panels
A 19 inches (482.6 mm)
B 6.97 inches (177 mm), 4U
4. Tighten the screws.
The allowed range for the fixing screws’ tightening torque is 0.52...0.74 foot-
pounds (0.7...1 Nm).
5.
Install the plug-in unit into the case.
1MAC051065-MB C Section 4
Mounting
615 series ANSI 25
Installation Manual