ABB ACS 400 - Page 119

108 ACS 400 User’s Manual
4009 ACT1 MINIMUM
Minimum value for actual value 1 (
ACT1). Refer to Figure 44 and to Group 13 parameters for analog input
minimum and maximum settings.
4010 ACT1 MAXIMUM
Maximum value for actual value 1 (
ACT1). Refer to Figure 44 and to Group 13 parameters for analog input
minimum and maximum settings.
4011 ACT2 MINIMUM
Minimum value for actual value 2 (
ACT2). Refer to parameter 4009.
4012 ACT2 MAXIMUM
Maximum value for actual value 2 (
ACT2). Refer to parameter 4010.
Figure 44 Actual value scaling. The range of the analog input signal is set by parameters 1301 and
1302 or parameters 1304 and 1305, depending on the analog input used.
Code Description
ACT1 (%)
Analog input signal
ACT1 MINIMUM
AI min
AI max
ACT1 (%)
Analog input signal
ACT1 MINIMUM
ACT
1 MAXIMUM
AI min AI max
ACT1 MAXIMUM
http://nicontrols.com