ABB ACS 400 - Page 88

ACS 400 User’s Manual 77
1002 EXT2 COMMANDS
Defines the connections and the source of Start, Stop and Direction commands for external control location
2 (
EXT2).
Refer to parameter 1001
EXT1 COMMANDS above.
1003 DIRECTION
1 =
FORWARD
2 = REVERSE
3 = REQUEST
Rotation direction lock. This parameter allows you to fix the direction of rotation of the motor to forward or
reverse. If you select 3 (
REQUEST), the direction is set according to the given direction command.
http://nicontrols.com