CHAPTER 4 – TRANSPORTATION, STORAGE AND DISPOSAL 74
4.5 Storage
4.5.1 Storage conditions
The minimum requirements for storage are based
on IEC 60721-3-1
'Classification of environmental
conditions: Classification of groups of environ-
mental parameters and their severities; Storage'
.
Table 4-2 Storage conditions
The drive can be stored for up to one year in the
original packaging as long as it is not damaged or
opened. For information on longer storage periods
contact the ABB service organization.
4.5.2 Storage
If the drive is taken out of service for a longer time
proceed as follows:
1. Cover all cable inlets and ventilation slots with
an impermeable plastic or aluminum foil and a
wooden panel.
2. Add a desiccant of the appropriate quality:
- 1 unit desiccant (30g) absorbs 6 g water
vapor.
The following quantity is needed when using
a polyethylene foil:
-10 units/m
2
foil
3. Close and lock the doors of the cabinet.
4. Use polyethylene or equivalent for packaging:
-0,3g/m
2
/24h water vapor diffusion
5. Attach humidity indicators to the packaging.
The storage conditions and the packaging should
be checked regularly. Any damages that occur
during the storage period should be repaired
immediately.
1K22 Climatic conditions
Air temperature -25 – +55 °C (drive)
-5 – +55 °C (spare parts)
Relative humidity 10 – 100%
Absolute humidity 0.5 – 29%
1Z3 Special climatic conditions
Movement of surrounding air 30 m/s
1B1 Biological conditions
Flora Negligible
Fauna Negligible
1M12 Mechanical conditions
Vibration
Acceleration spectral density
0.1 m/s
2
(5 – 200 Hz)
To Next Page
Loading...
