133
Example 2: The Instance Data Block of FB500 ABB_DRIVE_CONTROL_FB has been named
ABB_DRIVE_CONTROL_FB_DB and instance data block of FB501 has been named
ACS_DRIVE_PARA_DB and ACS355 with FENA-11 PROFINET module has been used.
Figure 160 FB501 PROFINET
Note: Using one instance of this block, you can either read or write a single parameter from or to the
drive. You can use multiple instances of this block for reading or writing multiple parameters.
5. In the Project tree, right-click PLC_1 (CPU) and select Properties to execute read/write
parameter value (0 → 1 (executed on positive edge).
Figure 161 Clock memory properties
To Next Page
Loading...
