ABB ACS355 series - List of Related Manuals; Introduction; Contents of this Chapter; Compatibility

Introduction
Contents of this chapter
This guide describes how to configure ABB Drives function blocks for Siemens PLC’s. ABB specific
ready-made function blocks from the ABB_DRIVES_LIB are used.
Compatibility
This guide applies to the following libraries.
Libraries
Supported PCL
series
ABB supported
Drives
SIMATIC Manager
version 5.5 or later
ABB_Drives_SIMACTIC_Library_3xx
_4xx_PLC_V1.2
S7-300 & S7-400
ACS800, ACSM1,
ACS350, ACS355,
ACS550, ACS850
ACS880, ACS580,
ACS380
TIA Portal
version 11 and 13
Note: TIA libraries
are compatible with
TIA Portal version
14.
ABB_Drives_TIA_Global_Library_3x
x_4xx_PLC_V1.2
S7-300 & S7-400
ABB_Drives_TIA_Global_Library_12
xx_15xx_PLC_V1.2
S7-1200 & S7-1500
1