30 Program features
Settings
Programmable digital inputs
The drive consists of six programmable digital inputs as a standard. Six extra inputs
are available if optional digital I/O extension modules are used.
Update cycles in the Standard Control Program
Settings
Run enable
The drive run can be prevented using the run enable function. If the run enable signal
is switched off, the drive will not start. If already running, the drive will stop according
to the setting of parameter 20.11 Run enable stop mode.
Parameter Additional information
Group 13 Standard AO Standard outputs for selecting and processing analogue output
values.
Input Cycle
DI/standard 6 ms
DI/extension 12 ms
Group/Parameter Additional information
Group 74 SPRS DI DI as start, stop, direction
To Next Page
Loading...
