ABB ACS880 - Speed and Feedback SEL

Parameters 41
76.02 Relay output 2 Selects the drive status indicated through Relay output 2
selection for SPRS.
The relay energizes when the status meets the setting.
For the available selections, see parameter 76.01 Relay
output 1.
K2 contactor
OFF
76.03 Relay output 3 Selects the drive status indicated through Relay output 3
selection for SPRS.
The relay energizes when the status meets the setting.
For the available selections, see parameter 76.01 Relay
output 1.
Sync
contactor ON
76.04 Relay output 4 Selects the drive status indicated through Relay output 4
selection for SPRS.
The relay energizes when the status meets the setting.
For the available selections, see parameter 76.01 Relay
output 1.
SPRS Ready
76.05 Relay output 5 Selects the drive status indicated through Relay output 5
selection for SPRS.
The relay energizes when the status meets the setting.
For the available selections, see parameter 76.01 Relay
output 1.
SPRS Run
76.06 DIO output 1 Selects the drive status indicated through Digital output 1
selection for SPRS.
Not used
Not used Not used 0
SPRS Ready SPRS ready to function: Run enable signal is on, no fault. 1
SPRS Run SPRS running: Start signal on, Run Enable signal is on, no
active fault.
2
SPRS Trip SPRS tripped. 3
76.07 DIO output 2 Selects the drive status indicated through Digital output 2
selection for SPRS.
For the available selections, see parameter 76.06 DIO output
1.
Not used
76.08 DIO output 3 Selects the drive status indicated through Digital output 3
selection for SPRS.
For the available selections, see parameter 76.06 DIO output
1.
SPRS Trip
76.09 DIO output 4 Selects the drive status indicated through Digital output 4
selection for SPRS.
For the available selections, see parameter 76.06 DIO output
1.
Not used
77
77 Speed and Feedback
SEL
Analog inputs for SPRS.
77.01 Speed reference
select
Defines the source from which the speed reference is given to
the drive.
It can be the voltage input AI1 or current input AI2 or AI3 or
AI4.
AI2 Scaled
AI1 Scaled Analog input AI1 after scaling. 1
AI2 Scaled Analog input AI2 after scaling. 2
AI3 Scaled Analog input AI3 after scaling. 3
AI4 Scaled Analog input AI4 after scaling. 4
No. Name/Value Description Def/
FbEq16/32