Chapter 4 – Programming the AC 80
AC 80 User’s Manual 4-9
Essential Settings for
ACS 600 MultiDrive
Note that only the user-adjustable settings are represented here.
DRIDS
DRIENG
Base part:
Defining the value of POSITION:
Parameter part:
Reference part:
NAME Max. 20 characters, e.g. dataset_MultiDrive
ACT 1
DS_NO Dataset number (10, 12, 14, ..., 32)
WR_ENA 1 (Must be forced by a connection from the PC section)
NAME Max. 20 characters, e.g. MULT_DR_OP_MODULEBUS
POSITION 100 + address of the drive. See below.
IMPL 1
TYPE ACS 600 ENG
Position on
Optical
ModuleBus
Setting of drive
parameter 70.01
DRIENG POSITION setting
(100 x Cluster + Position)
117 101
218 102
319 103
• • • • • • • • •
12 28 112
APPID 0
REF1 Max. 20 characters, e.g. dataset_MultiDrive
REF2 Max. 20 characters
• • • • • •
REF10 Max. 20 characters
To Next Page
Loading...
