ABB CM30 User Manual

ControlMaster CM30 and CM50
Universal process controllers,
1
/4 and
1
/2 DIN 2 Introduction
4 IM/CM/ED–EN Rev. B
2 Introduction
This manual provides details for the ControlMaster CM30 (
1
/4 DIN) and CM50 (
1
/2 DIN) controllers with
Extended / Dual Loop functionality
2.1 EC Directive 89/336/EEC
In order to meet the requirements of the EC Directive 89/336/EEC for EMC regulations, this product must
not be used in a non-industrial environment.
2.2 End of Life Disposal
Controllers with Standard functionality and above contain a small lithium battery that must be removed and
disposed of responsibly in accordance with local environmental regulations.
Note.
 Read all relevant sections of this guide before configuring the system or modifying system
parameters.
 Install and use associated equipment in accordance with the relevant national and local
standards.
 System configuration must be carried out only by users or personnel with approved access rights
(user privileges).

ABB CM30 Specifications

General

Product Name	CM30
Product Type	Controller
Manufacturer	ABB
Frequency	50 / 60 Hz
Protection Class	IP20
Mounting	DIN Rail
Operating Temperature	-25°C to +60°C