ABB ControlMaster CM15 - Accessing the Connection Terminals

CONTROLMASTER CM15 | UNIVERSAL PROCESS INDICATOR,  DIN | CI/CM15-EN REV. A
13
NOTICE
• Always route signal leads and power cables
separately, preferably in earthed (grounded)
metal conduit.
• Use screened cable for signal inputs and relay
connections.
• Replacement of the internal battery (type Varta
CR1620 3V lithium cell) must be carried out by an
approved technician only
Accessing the connection terminals
Referring to Figure 5, press terminal cover release
catch A and pull the terminal cover B away from the
indicator body.
A
B
Figure 5 Removing the terminal cover