4
CONTROLMASTER CM15 | UNIVERSAL PROCESS INDICATOR, DIN | CI/CM15-EN REV. A
1 Health & Safety
Document symbols
Symbols that appear in this document are explained
below:
WARNING
The signal word ‘WARNING’ indicates an imminent
danger. Failure to observe this information may
result in death or severe injury.
NOTICE
The signal word ‘NOTICE’ indicates potential
material damage.
Note.
‘Note’ indicates useful or important information about
the product.
Safety precautions
Be sure to read, understand and follow the instructions
contained within this manual before and during use of
the equipment. Failure to do so could result in bodily
harm or damage to the equipment.
WARNING
Installation and maintenance of this product must
only be conducted by personnel authorized to work
on electrical installations and in accordance with
relevant local regulations.
To Next Page
Loading...
Need help?
General
