ABB DCS 500B

DCS500 Pin and Parameter list
A 67
Group 40: FIELDBUS
FIELDBUS_PAR.1
Parameter of FIELDBUS-function block. (S12/16 ).
Selects the fieldbus-adapter.
0 = DISABLE
1 = Fieldbus
2 = Advant / DDCS
3 = MODBUS INTERNAL
4 = RESET fieldb. par.
If Fieldbus is selected the following fieldbus adapters are supported:
PROFIBUS adapter NPBA-02
PROFIBUS adapter NPBA-12
AC31(CS31) adapter NCSA-01
MODBUS adapter NMBA-01
MODBUS+ adapter NMBP-01
CANopen adapter NCAN-02
DeviceNet adapter NDNA-02
4001 FB_P: E2 SC: 1 HL: 4 LL: 0 D: 0 U: -