- 13 -
cr09_01_2
24AP4 Fieldbus board - DeviceNet
Fieldbus connector
5-pin plug-able screw terminal fieldbus connector (Phoenix type)
Connector pin Signal Description
1 V- Negative supply voltage
2 CAN_L CAN_L bus line
3 SHIELD Cable shield
4 CAN_H CAN_H bus line
5 V+ Positive supply voltage
The bus interface shall be supplied with 24VDC, but will operate as intended as long
as the supply voltage is within the DeviceNet-allowed 11 to 25V DC range.
To Next Page
Loading...
