ABB Focus II FII-4-14 Series - 16 Technical Specifications

47
www.abb.com/lowvoltage 2TLC172015M0201, rev. D
16 Technical specications
Performance
Protective height Light curtains: 150 mm - 2400 mm
Light grids: 500 mm - 1200 mm
Object resolution Light curtains: 14 mm and 30 mm
Beam distance (center) Light curtains: 7.5 mm and 18 mm
Light grids: 300, 400, and 500 mm
Double beams (-D versions): 46 mm
Operating range 0.2 m - 3.0 m (FII-4-14-...), default
3.0 m - 6.0 m (FII-4-14-...), DIP Switch option
0.2 m - 7.0 m (FII-4-30-...), default
7.0 m - 14 m (FII-4-30-...), DIP Switch option
0.5 m - 20 m (FII-4-K...), default (not -KxC versions)
20 m - 40 m (FII-4-K...), DIP Switch option (not -KxC versions)
0.5 m - 7 m (FII-4-K2C-900/1200)
0.5 m - 8 m (FII-4-K2C-800)
0.5 m - 12 m (FII-4-K1C-500)
Effective Aperture Angle For FII-4-xx-yyyy: ±2.5° maximum, transmitter and receiver
according to IEC61496-2 for distances > 3 m
Response time ON to OFF Maximum: 103 ms. See 5.7 for more information
Light source Infrared Emitting LEDs, Wavelength 880 nm
Power Dissipation: ≤3 mW Class 1 acc. EN60825-1
Mechanical
Housing material Painted aluminium, yellow, RAL 1018
Front plastic material Polycarbonate
Connector material Polyamide 6.6
End cap material Polyamide 6.6
Sealing, gasket material EPDM
Mounting bracket material Black powder coated stainless steel
Mounting bolt Stainless steel M6
Wiring connectors 8 Pin Receiver and 5 Pin Transmitter (M12)
Environmental
Enclosure rating IP65
Operating temperature -10°C ... +55°C
Storage temperature -25°C ... +70°C
Relative humidity 95% maximum, non condensing
Vibration (IEC 60086-2-6) 10-70 Hz, 0.35 mm, maximum on all 3 axes
Bump (IEC 60086-2-29) 10 G for 16 ms, 1000 bumps on all 3 axes
Electrical
Power transmitter 24 VDC ±20%, maximum current 70 mA
Power receiver 24 VDC ±20%, maximum current 100 mA
Input voltage threshold V
H
min = 17 VDC, V
L
max = 6 VDC