DescriptionNameIndex
Selects which indications are given when
one or both Safe torque off (STO) signals
are switched off or lost. The indications also
depend on whether the drive is running or
stopped when this occurs.
STO indication run/stop31.22
For more information, see the firmware
manual.
The drive generates a warning both when
the drive is running and when it is stopped.
Warning/Warning
This parameter value does not have an ef-
fect on the SMT function, but this is the re-
commended setting. For the cabinet-built
drives, ABB has set this value at the fact-
ory.
50 Parameter settings
To Next Page
Loading...
