ABB FPTC-02 - Page 51

DescriptionNameIndex
Activates FPTC modules installed on the
control unit of the drive.
FPTC configuration
word
35.30
With this word, it is also possible to sup-
press the non-safety related motor temper-
ature warnings (XWRN input). It is not
possible to suppress the SMT faults (XFLT
input).
DescriptionNameBit
1 = Yes: Module installed in slot 1.Module in slot
1
0
0 = No (default): Warnings from the module
in slot 1 not suppressed.
Disable slot 1
warning
1
1 = Yes: Warnings from the module in slot
1 suppressed.
1 = Yes: Module installed in slot 2.Module in slot
2
2
0 = No (default): Warnings from the module
in slot 2 not suppressed.
Disable slot 2
warning
3
1 = Yes: Warnings from the module in slot
2 suppressed.
1 = Yes: Module installed in slot 3.Module in slot
3
4
0 = No (default): Warnings from the module
in slot 3 not suppressed.
Disable slot 3
warning
5
1 = Yes: Warnings from the module in slot
3 suppressed.
Reserved6…15
Parameter settings 51