Page 20
© Copyright 2021 ABB. All rights reserved.
BDFD
BDFB’s ship on a 42 by 42 inch skid as shown below. A 15/16 inch wrench or socket is required to
remove 5/8 inch diameter shipping bolts from skid. Before opening the packaging, carefully inspect
the outside in the presence of shipping personnel for signs of damage. Carefully open the
packaging to verify that the contents are complete and undamaged. If damaged, follow the
shipping carrier’s procedure for filing a damage claim. If the equipment must be returned, repack in
the original shipping packaging.
Before continuing, verify that the following conditions exist at the installation site:
•Floor is conditioned and clean (refers to removal of any combustible flooring, e.g., carpet, wood,
etc.).
•Job Site Documentation details cabinet locations.
Unpacking
To Next Page
Loading...
