Page 23
© Copyright 2021 ABB. All rights reserved.
Cabinet Top Cover
When cabinets are used in bottom feed applications, an optional 848429288 top cover kit may be
installed on top of the 26-inch wide cabinet as shown below. Secure cover with four 5/8” bolts and
flat washers using a 15/16” socket.
Secure the cabinets together with four 5/8” bolts, lock washers and flat washers (provided). Use a
15/16” socket.
Secure the interframe ground cable with two 7/16” bolts, lock washers, flat washers and nuts
(provided). Use 7/16” socket and wrench. This provides a continuous frame ground to the top of the
cabinet.
Ground
Strap
7’ Cabinet 7’ Cabinet
Ground
Strap
4-1/2’
2’
Cabinet Extensions – G7 and G8 only
Optional cabinet extensions, constructed in the same manner as the 7 foot cabinet, mount on top
of the 26-inch wide cabinet to match the height of adjacent cabinets.
To Next Page
Loading...
