Page 43
© Copyright 2021 ABB. All rights reserved.
Output Voltage: -48Volts DC
Output Capacity – 800A per Distribution Panel, 800A per Load
8 Load BDFB: 3200A per Side, 6400A Maximum per Bay G101 and G102 only
6 Load BDFB: 2400A per Side, 4800A Maximum per Bay G7 and G8 only
4 Load BDFB: 1600A per Side, 3200A Maximum per Bay all
2 Load BDFB: 800A per Side, 1600A Maximum per Bay all
Agency Approval UL Listed (cULus), NEBs
Environment
Safety Tested Limit - maximum ambient temperature: 104°F (40°C).
Cabinet Seismic Zone 4 Box Framework
Color:Central Office Soft Blue
Width: G7, G101, and G102: 26 inches (660 mm)
G8: 34 inches (864 mm)
Height: 84 inches (2134mm)
G7 and G8 15 inches (381 mm)
G101 24 inches (610 mm)
G102 30 inches (762 mm)
Weight: 375 pounds (6 panels, approximate)
Front Fuse/Breaker and Alarm Access, Rear Wiring Access
Distribution G7 and G8 28-Position Panel for Bullet-Style Protectors
G101 and G102 20-Position Panel for Bullet-Style Protectors
Protectors • Bullet-Style Fuse Holders, TPS or TLS Fuses through 125A
• Single Pole LEL Bullet-Style Circuit Breakers through 100A
• Two-Pole LEL Bullet-Style Circuit Breakers through 150A
• Three-Pole LEL Bullet-Style Circuit Breakers through 250A
• No Protector Spacing Restrictions
• Maximum Loading
• 60% of protector rating - Continuous (List 1)
• 80% of protector rating - Maximum Load (List 2 - typically end of discharge)
Input Feed Limit -
The short circuit current capability of the input feeds to the distribution panel must not exceed 10,000 am-
peres.
Accessories • External Ground Bar Assembly
• Seismic Anchor Kits
• Bullet-Style Fuse Holders, Fuses
• Bullet-Style Circuit Breakers
• Top Cover for Bottom Feed Applications.
For G7 and G8 only
• 2 ft Extension Cabinet for 9-ft application
• 4-1/2 ft Extension Cabinet for 11-1/2 ft applications
Specifications
To Next Page
Loading...
